Camping Central

This swag is designed by Onland Australia, so you know you are getting a quality swag that has been designed with the durability and features needed to make the most of our great outdoors. With a long list of features this swag with ensure your next foray into the bush is comfortable and hassle free.

Features:

• Dlx "A" Frame Swag.
• Extra Heavy Duty Ripstop 14 Oz Canvas.
• 1 x Centre Custom Fit Pole.
• Head & Foot Awning.
• PVC Base.
• Entry from Both Ends or 2 x Full Zippered Side Entry Points.
• Both Ends w/- drop down Mozzie & Canvas Flaps.
• Fully Zippered Cover

The Onland swags come with manufacturers warranty and are designed for the rugged Australian outdoor.

Weight: approx. 10kg
Size(s): (W) 90cm x (L) 215cm (H)77cm
Mattress: 5cm

Note: 215cm Length does not include 30cm Awning at each end.

Ask a Question about this Product

Ask a question

Important: Swag Helpful Hints

• This product is designed as a portable and temporary dwelling and is not for permanent use.
• Avoid continuous exposure to sunlight as this will eventually cause the canvas to weaken, fading is an early warning sign of this process
• New canvas products require conditioning. Simple pitch your swag and wet it down with a garden hose and let it dry. This allows the stitching holes to shrink and the stitching thread to swell providing a seal to form. It may be necessary to repeat this procedure 2 or 3 times to fully condition the canvas. Ensure the swag is completely dry before packing away.
• A traditional first aid treatment for canvas is to always carry some candle wax. After storage and transport canvas may develop a damp area in wet conditions. Simply rub the candle wax to the outside of the damp area and this will create a waterproof barrier.
• To extend the life of the mattress always store the swag and mattress unrolled.
• Before storing the swag ensure the swag is clean and completely dry. Never store a damp or wet swag.

Swag Assembly Tips:

• Select a level camp site, clear the area of stones and twigs etc.
• Unroll the swag, you will find pegs, ropes and on some models poles.
• Peg out the four corners.
• On the models with alloy poles, assemble alloy poles, side through the poles sleeves, connect to the pin and ring assembly at the base of the swag and connect the plastic hook clips. On models with 3 alloy poles, the mid poles is fitted inside the swag and connected with Velcro securing tabs.
• On models with a single short fibre pole this is to be placed into the external pocket at the foot of the swag and wedged into a vertical position.
• On models with metal pole, assemble the pole, place the spigot through the eyelet at the head of the swag, attach guy rope and peg out or tie to vehicle or tree.
• If required use guy ropes provided to peg out or tie to vehicle or tree. This will keep the swag taunt which is important during rain.